Filter
Intuvo 9000 GC System
Fast gas chromatography throughout while simplifying your laboratory workflow.
View product
8890 GC
The 8890 Gas Chromatograph (GC) System delivers fast and accurate results with flexible configuration capabilities to address specific analysis demands.
View product
8860 GC System
The 8860 Gas Chromatograph (GC) System sets the standard for routine GC analysis with reliability and robustness.
View product
990 Micro GC System
Agilent 990 Micro GC systems provide needed answers with innovative, industry-leading features with the quality and speed that are critical to gas analysis.
View product
7890B GC System
Widely used GC system featuring accurate temperature controls, precise injection systems, and high performance Electronic Pneumatic Control (EPC) modules for good retention time and area count repeatability.
View product
7820A GC System
The system provides reliable capabilities for a wide range of application areas, meeting regulatory and SOP needs for small-to medium-sized labs.
View product
LC/MSD
The Agilent InfinityLab LC/MSD system uses the power of mass-selective detection to enhance analytical confidence.
View product
1290 Infinity II LC System
The 1290 Infinity II LC System is an ultra-high performance LC that has market-leading sample capacity and is designed for the lowest dispersion for the most challenging ultra-HPLC experiments.
View product
6470B Triple quadrupole LC/MS
The Agilent 6470B triple quadrupole LC/MS system delivers robust performance and high versatility for commercial, life sciences research, and regulatory applications.
View product
5977B GC/MSD
The Agilent 5977B GC/MSD is the latest in the series of most trusted single quadrupole GC/MS instruments.
View product
7010B Triple Quadrupole GC/MS
The Agilent 7010B triple quadrupole GC/MS is the most sensitive version of Agilent compact benchtop triple quad (MS/MS) systems, providing attogram-level detection limits in electron ionization (EI) mode.
View product
7250 GC/Q-TOF
The Agilent 7250 GC/Q-TOF system delivers full-spectrum, high-resolution, accurate mass data with a wide dynamic range for identifying and quantifying GC-amenable compounds.
View product
Thermal Desorption System (TDS)
GERSTEL is the leader in analytical thermal desorption techniques.
View product
MAESTRO Software
Automated Sample Preparation and Sample Introduction Software.
View product
MultiPurpose Autosampler for GC – GC/MS
The GERSTEL MPS is a multifunctional autosampler and sample preparation workstation for GC and GC/MS.
View product
Multipurpose Autosampler for LC – LC/MS
Improve the productivity of your LC/MS system while ensuring the best accuracy and reliability.
View product
SPME
Simple and effective analyte extraction and concentration using automated Solid Phase Microextraction
View product
Automated Dynamic Headspace (DHS)
The DHS option efficiently extracts and concentrates VOCs from liquid or solid samples.
View product
SmartSPE® ITSP
ITSP® (Instrument Top Sample Preparation) is a patented consumable cartridge for automated small-scale SPE.
View product
Pyrolysis System
The GERSTEL Pyrolysis system enables highly flexible and efficient automated pyrolysis of solids and liquids at up to 1000 °C combined with determination of the thermal decomposition products using GC/MS.
View product
Olfactory Detection Port – ODP
The Olfactory Detection Port allows the sensing of compounds by the human nose as they elute from the column of a gas chromatograph.
View product
GC Preparative Fraction Collector – PFC
GERSTEL PFC automatically collects compounds after gas chromatographic separation.
View product
Multidimensional Gas Chromatography
Multidimensional Gas chromatography experts rely on sharp peaks and baseline resolution to provide accurate results.
View product
Cooled Injection System (CIS)
The GERSTEL Cooled Injection System is the most widely used PTV type gas chromatographic inlet in the world.
View product
Voice200ultra High Throughput
For routine, repeatable, volatiles analysis, nothing compares to automated SIFT-MS
View product
Voice200ultra Real Time
The Voice200ultra SIFT-MS instrument provides the flexible platform on which many customers build their applications.
View product
Atomx XYZ
The Atomx XYZ is the second generation combined soil/water autosampler and purge and trap concentrator system in the Tekmar VOC product family.
View product
Lumin
In 1974, Tekmar developed an idea that revolutionized the way laboratories performed Volatile Organic Compound (VOC) testing.
View product
AQUATek LVA
The AQUATek LVA is a full automation solution for routine analysis of waters by purge and trap concentration.
View product
Versa
Teledyne Tekmar Versa is the companion autosampler to Headspace products and the perfect, most economical solution for headspace analysis.
View product
The Sherlock™ Microbial Identification System (MIS)
The Sherlock™ Microbial Identification System (MIS) was launched in 1991 and represents a rapid, accurate and inexpensive solution for the identification of over 1,500 microbial species, fatty acids and PLFAs by GC-FAME analysis.
View product
CoolR+
The GC CoolR+ is a Fast Oven Cool-Down Accessory. It improves the oven ventilation during the cool-down cycle.
View product
Filtration
Removing particulate matter from a sample or extract prior to analysis is critical for many GC/MS- and LC/MS analysis methods, particularly when large series of samples must be analysed automatically.
View product
Automated Solid Phase Extraction (SPE)
If Solid Phase Extraction (SPE) can be reliably automated, it becomes a much more efficient and reproducible process.
View product
Multi Position Evaporation Station (mVAP)
The GERSTEL Multi-Position Evaporation Station (mVAP) performs solvent evaporation enabling automated sample concentration for lower detection limits as well as solvent exchange for improved chromatography and LC/MS ionization.
View product
Automated Liner EXchange (ALEX)
The GERSTEL Automated Liner EXchange ALEX technology automates the task of replacing liners in the GERSTEL Cooled Injection System CIS.
View product
Twister
The GERSTEL Twister® enables efficient extraction of organic compounds from aqueous matrices based on Stir Bar Sorptive Extraction (SBSE).
View product
Tube Spiking System (TSS)
In combination with the GERSTEL-MultiPurpose Samplers (MPS), the GERSTEL Tube Spiking System (TSS) enables automated generation of standard tubes for Thermal Desorption analysis.
View product
Thermal Desorber TDU 3.5
The Thermal Desorber TD 3.5+ is a flexible automated solution for thermal desorption and thermal extraction. The TD 3.5+ fits on top of any modern GC without the need for additional bench space and it is perfectly suited for the analysis of material and for thermal desorption of sorbent tubes used to sample whole air.
View product
quickMIX
quickMIX for the GERSTEL MPS robotic series enables extremely fast and efficient mixing and extraction of samples as part of the automated sample preparation process.
View product
Agitators/Incubators
Reliability and reproducibility of any sample preparation depends on exact thermostatting and efficient mixing of samples, solvents and reagents. GERSTEL offers a variety of agitators for the MultiPurpose Sampler for every application.
View product
MPS Standalone
As a new member of the MPS family, the MPS robotic is a highly efficient autosampler with extended robotic functionality which provides reliable processing of complex tasks.
View product
GERSTEL SPExos
Online SPE system with replaceable SPE cartridges: The best of all worlds.
View product
Vortexer
The Vortex Module allows efficient mixing during liquid homogenisation and extraction steps.
View product
Sigma Centrifuge
The Sigma Centrifuge is fully compatible with the Gerstel MPS and is capable of up 4.47G
View product
Sonication Bath
The Ultrasonic bath for the GERSTEL MPS enables samples to be sonicated before injection or as part of the automated sample preparation process.
View product
SID Barcode Reader
The Sample ID (SID) 1D/2D Barcode reader for the GERSTEL MultiPurpose Sampler (MPS) uses a dual camera setup and image analysis for positive identification of samples. Fully implemented into the MAESTRO software, SID enables independent sample logging or fully integrated sample ID transfer to the data file.
View product
Tube Elution
Solvent elution of Thermal desorption tubes into a vial via a fully automated process.
View product
MPS Integrated Weighing Option
Standard autosampler vials are placed in the balance by the MPS and liquid samples, standards, reagents or diluents added, weighed and registered separately.
View product
Capper Decapper
The Decapper is essential for applications which require opening and closing of vials, specifically in combination with the Pipette Tool.
View product
Pipette Tool
The Pipette tool allows automated pipetting and works in combination with the Capper/Decapper module.
View product
Solvent Filling Station SFS3
The GERSTEL Solvent Filling Station SFS3 makes it possible for automated high throughput applications to run overnight or over the weekend.
View product
Cooled Stack
GERSTEL provides a wide range of cooled trays and stacks for the MultiPurpose Autosampler either as part of an analysis system or as an off-line WorkStation
View product
LC-MS Tool
The LC-MS Tool allows rapid injection cycles with minimized carryover. It can accommodate a 100 µL or 250 µL syringe. Two needle lengths are available.
View product
Thermal Desorption Unit – TDU2
The Thermal Desorption Unit (TDU 2) is a flexible automated solution for thermal desorption and thermal extraction.
View product
Pegasus® BT 4D GCxGC-TOFMS
The Pegasus BT 4D offers enhanced sensitivity by coupling our benchtop Pegasus BT with a high performance GCxGC modulation system
View product
TOC Fusion
The Fusion Total Organic Carbon (TOC) Analyzer utilizes powerful Ultra Violet (UV) Persulfate oxidation allowing superior carbon liberation from even the most challenging matrixes.
View product
Pegasus® BT GC-TOFMS
The Pegasus® BT allows you to achieve all of the data you need from a single sample run.
View product
ChromaTOF® Software
ChromaTOF offers seamless control of both the instrument and its accessories, as well as an intuitive interface with highly integrated data processing.
View product
ChromaTOF-GC
Used by industry leaders for over 15 years, ChromaTOF-GC supports GCxGC deconvolution, visualization, and reporting.
View product
ChromaTOF® Tile Analytical Software
GCxGC-TOFMS Data Analysis: Turn Your Data into Chemistry
View product
LECO Flux Flow Modulator
The innovative LECO FLUX™ GCxGC flow modulator was designed with one goal in mind—to make GCxGC more routine, accessible, and easier for you.
View product
LECO QuadJet™ Thermal Modulator
LECO’s QuadJet™ thermal modulator delivers the highest performance of any available modulator for GCxGC.
View product